Sauna for Renters: The Best Saunas to Take When You Move
Renting shouldn’t mean going without a sauna. Which saunas move with you, why the wood matters, how to heat one with no rewiring, and our top picks.
Short answer: You don’t have to own your home to own a sauna. You need one built to move. A sauna tent with a propane heater packs into a car. A prebuilt sauna like the Haljas Hele Nano rolls away on a pallet jack. A panel kit like the Leil Celto or an Auroom Cala unscrews and goes back together at the next address. Buy thermally modified wood if your sauna might ever come apart, get your landlord’s OK in writing before any wiring, and leave the wood stove for a house you own. Our top picks for renters are the Celto, the Hele Nano, the SaunaLife CL5G, the SaunaLife G6 and the SaunaTrekker tent outdoors, and the Auroom Cala Wood indoors.
Sauna shouldn’t be only for homeowners
More than 46 million American households rent their homes, about a third of all households, according to the Census Bureau’s American Community Survey . Harvard’s Joint Center for Housing Studies counts 46.1 million renter households in 2025 , nearly a quarter of them headed by Gen Z. Renters also move far more often. In the Census Bureau’s 2023 mobility survey , 16.2% of people living in rented homes had moved in the past year, compared with 4.1% of people in homes they owned.
That’s why so many renters talk themselves out of a sauna. Why build something for a place you might leave in two years? The research is a good reason not to wait. A Finnish study that followed 2,315 men for a median of about 21 years found that those who took a sauna four to seven times a week had a 63% lower rate of sudden cardiac death than men who went once a week. A later study of 1,628 adults from the same region linked the same habit with a 61% lower rate of stroke. These are associations drawn from people’s existing habits, not proof that the sauna caused the difference, and our guide to the heart research covers the limits. What stands out is the frequency. The results came from people who used a sauna most days of the week.
Four sessions a week at a public sauna is a real commitment: a drive each way, a booked time slot or a membership, and a schedule that has to line up with work, kids and everything else. We love public saunas, the SaunaShare directory is full of them, and they’re the best way to try different kinds of heat before you buy. But the sauna you use four times a week is almost always the one a few steps from your door.
What makes a sauna work for renters
It leaves with you. Either it moves in one piece, or it comes apart and goes back together without damage.
It asks little of the property. No digging, no chimney through a roof you don’t own, and as little permanent wiring as possible.
It survives the move. That comes down to the wood and to how the walls are built.
If it might come apart, buy thermally modified wood
A sauna puts wood through more than almost anything else in a house. It goes from cold and damp to 180°F and dry, over and over, for years. Ordinary kiln-dried boards keep swelling and shrinking with every cycle. They warp and cup, and once a wall has moved, it never goes back together right. So if there’s any chance your sauna will come apart one day, buy it in thermally modified wood.
Thermal modification bakes wood with heat and steam until its chemistry changes and it takes on far less water. The International ThermoWood Association’s ThermoWood Handbook says wood modified at 428°F settles at about half the moisture content of untreated spruce, and that thermally modified timber stays well under 20% moisture whatever the humidity. Less water in the wood means less swelling and shrinking. Haljas Houses puts it plainly in its sauna manual: the risk of wood cracking or bending “is minimal in the case of heat-treated material and home use.”
Cross-laminated timber, or CLT, solves the same problem a different way. Each panel is made of layers of solid wood glued at right angles, so every layer holds the next one flat. The Leil Celto is built this way. Its spruce isn’t thermally modified; the cross-lamination is what keeps it stable.
Saunas that come apart and go back together
Leil Celto: the easiest kit to take with you
Of everything we’ve worked with, the Celto from Leil Saunas in Estonia is the easiest outdoor sauna to take apart and move. Its walls, floor and ceiling are 2.4-inch solid spruce CLT panels, screwed together. Leil puts assembly at four to six hours with two or more people, and taking it down is the same job in reverse. Instead of hundreds of loose boards, you’re handling a set of big, stable panels.
The Celto S seats two in a 65 by 56-inch footprint. The Celto M seats three in 81 by 56 inches. Both have an EPDM rubber roof membrane over the CLT ceiling, four vents and bronze tempered glass. The spruce arrives natural, so the outside needs a clear UV-protective finish after you build it. The heater is an electric Harvia KIP or HUUM DROP on Leil’s own heater stand.
Auroom Cala: insulated wall elements that unscrew
Auroom’s indoor saunas aren’t built board by board. The Cala arrives as preassembled, insulated wall elements and ceiling elements, each with an inner and an outer layer of wood, that screw onto a base frame. That multi-layer construction is why an Auroom comes apart and reassembles so cleanly. Customers move them when they relocate, and the same saunas go up and come down at trade shows.
For a renter with a basement, a spare room or a garage, the Auroom Cala Wood is our indoor pick, and it comes in Thermo-Aspen. Like any indoor sauna, it runs on an electric heater, so the wiring question below applies.
Thermally modified kits: SaunaLife CL5G and CL7G
The SaunaLife Cube saunas are handcrafted in Northern Europe, with wood that stays put. The CL5G seats four behind a full glass front. Its walls are thick thermally modified European spruce, and a two-layer shingle roof, drip edges, floor drainage, vents and raised foundation beams keep it dry outdoors. A stave-built cube takes more work to take down than a panel kit, but thermally modified staves go back together. For a bigger group, the CL7G seats six with more than 7 feet of headroom inside, and it’s one of the best saunas for propane heat (more on that below).
Prebuilt saunas move in one piece
A prebuilt sauna arrives finished. There’s nothing to take apart when you move. It leaves the way it came: in one piece, lifted onto a truck.
Haljas Hele Nano: a pallet jack is all it takes
Haljas Houses builds the Hele Nano complete in Estonia: a sauna for one or two people with a thermally modified alder interior and double-glazed mirrored glass outside. It sits on a permanent metal skid, and the manual says it can be lifted from any of its four sides with a forklift or a pallet jack. It measures 62.5 by 45 inches, stands 7 feet 6 inches tall and weighs about 1,146 pounds without its heater.
That makes it the rare sauna that works on a patio, on a deck or in a garage. Haljas sets it on four level concrete tiles, so there’s no footing to pour. For a garage, check the door first: at 7 feet 6 inches tall, the Nano clears an 8-foot garage door, and a standard 7-foot door is too short. A certified electrician connects its electric heater.
SaunaLife G6: a full-size sauna, delivered whole
The G6 is a five-person outdoor sauna that arrives completely assembled. It has insulated walls, a double-glazed insulated window wall, a black-painted thermally modified exterior and a Thermo-Aspen interior with two-tier benches. It measures 95 by 83 inches, stands 8 feet tall and ships at about 2,756 pounds, so a move takes a forklift or a crane and a flatbed. There’s no rebuild at the other end. Set it down, level it and have the heater reconnected.
Sauna tents pack into a car
The lightest way to own a sauna is a tent. The SaunaLife SaunaTrekker with a TITAN propane heater is our recommended sauna tent: the standard SaunaTrekker seats four and the SaunaTrekker XL seats six. Ben Burger’s third solo setup of his SaunaTrekker took under three minutes from bag to staked, and he now uses it more than his indoor sauna. Nothing is attached to the property. Pitch it on the lawn or the patio, take your rounds, and it packs back into the car. When you move, it’s just another bag in the truck.
Electric, propane or wood: choosing heat as a renter
Electric: the wiring is the biggest sunk cost
Most electric sauna heaters run on 240 volts and need their own circuit from the electrical panel. The installation manual for Harvia’s KIP, one of the heaters on our list, says only qualified electricians may do the electrical work and calls for a standard 2-pole breaker, and the 8 kW KIP draws 33.3 amps. For a renter, that circuit is the one part of a sauna that can’t move. The heater, the stones and the sauna itself all come with you. The wire in the wall, the breaker in the panel and the electrician’s hours stay behind.
That doesn’t rule electric out. It means planning for it. Get your landlord’s permission in writing before an electrician touches the panel. Put the sauna close to the electrical panel to keep the run short. And ask whether the landlord will share the cost: a dedicated 240-volt circuit stays with the property after you leave. Every electric sauna on our list needs a licensed electrician for the wiring.
Propane: sauna heat with no wiring
Propane skips the electrician entirely, which is why it suits renters so well. The SaunaLife TITAN SL1 runs on a standard propane cylinder that sits outside the sauna, puts out up to 8.1 kW with high and low settings, and holds 44 pounds of stones for real löyly. SaunaLife rates a standard 20-pound cylinder at 15 to 25 hours of sauna. It works in the SaunaTrekker tents and in properly ventilated outdoor saunas from 140 to 350 cubic feet (up to 425 if insulated) with 50 inches of clearance above the heater. The SaunaLife CL7G fits both, with about 307 cubic feet inside and an 85.5-inch ceiling.
Propane still demands respect. TITAN has an oxygen depletion sensor, a 60-minute shutoff timer and a tip switch, and none of that replaces ventilation. Keep the cylinder upright and outside, keep every vent open, put the heater on a level noncombustible base, and never run it unattended or in a living space. The U.S. Consumer Product Safety Commission’s rule is never to use portable fuel-burning camping equipment in a tent or other enclosed space unless it’s designed for that use and comes with instructions for it. TITAN is designed for the SaunaTrekker tents, and only those.
Wood: harder every year
We love a wood-fired sauna, and plenty of the saunas on SaunaShare burn wood. For a renter, it’s the hardest heat to get approved. Wood smoke draws more scrutiny every year. Wood is the main heating fuel in just 2% of US homes, yet the EPA’s 2023 emissions inventory found it produces about 28% of wintertime fine-particle pollution, according to a 2026 study in Science Advances . Air districts answer with burn bans. In the San Francisco Bay Area, no one may burn wood in a wood-burning device during a Mandatory Burn Ban , and new buildings can’t include one at all. Around Seattle, burn bans prohibit all outdoor burning, wood-fueled recreational fires included. A wood stove also usually means a permit, a chimney through a roof you don’t own, clearances an inspector will check, and a landlord and an insurer who are both comfortable with an open fire on the property. Smoke drifts, and neighbors notice. If you rent, electric or propane is the easier conversation.
SaunaShare is a JavaScript application. Enable JavaScript for the full
experience, or use the links below to browse the directory.
Browse saunas
Learn
For operators
SaunaShare
More from the SaunaShare blog
Related reading
From SaunaShare, Inc.